Installation:

The installation is carried out with the ribs (or corrugations) running down the slope of the roof (longitudinal and transversal overlaps).

Horizontal laying direction: Opposite direction of the prevailing wind. The sheet to be installed covers, along the adjacent longitudinal edge, the sheet installed previously.

Vertical laying direction: From the bottom up. The downslope lap (cut back) of the top sheet covers the lower sheet already
installed.

 

 

Fixings:

The fixings must include following accessories (waterproofing and loads distribution):
- Sealing washers
- Saddle supports or curved washers (adapted to the profile and to the site corrosivity)
- Profile supports.