BITULINE for Roofing
Bituminous membranes for waterproofing.
Permanent Waterproofing!
The membranes are combined together by fusion welding and then simply bonded onto the desired surface. This welding technique makes waterproofing permanent. The waterproofing of the BITULINE system is also complete at joints.
State-of-The Art Technology
BITULINE membranes are manufactured using a state-of-the art technology equipment at a factory environment ensures homogenous waterproofing as well as integrity of materials in terms of quality which eliminates any insulation risks.
Watertightness at Every Condition
Thanks to the modified bitumen,insulation retains its flexibility even under very low temperatures,free of any cracks, while loosening rather late and thus maintaining its form under high temperatures. This is why BITULINE system may be used safely under any climatic conditions.
The System BITULINE’s scope is the torch on modified bituminous waterproofing membranes called BITULINE and it’s accessories in various waterproofing needs. BITULINE membranes are used for waterproofing of flat and pitched roofs, terraces, wet surface floorings, roof gardens.
Prima Series Membranes
BITULINE Prima
The “Prima” series consist of plastomeric membranes modified with “Atactic Polypropylene” (APP). BITULINE Prima membranes are in compliance with the cold and warm weather conditions of mild climate zones (minimum -5°C) offering economic and reliable waterproofing systems with a wide spectrum for different types of buildings. Minimum 150 gr/m² of polyester reinforcement are used in “Prima” PP series and minimum of 50 gr/m² of fiberlass reinforcement are used in “Prima” PG series.
Extra Series Membranes
BITULINE Extra
The “Extra” series consist of plastomeric membranes modified with “Atactic Polypropylene” (APP). BITULINE Extra EP membranes series having increased their tensile strenght with minimum of 180 gr/m2 of polyester reinforcement perform better at high and low temperatures in regions with extreme climatic conditions (minimum -10°C) with its flexibility and durability. Minimum of 60 gr/m² of fiberlass reinforcement are used in “Extra” EG series. The BITULINE EP410 is an especially formulated “Heavy Duty” membrane for use in the waterproofing of highways pavements, road bridges, viaducs etc. And a minimum of 250 gr/m² of polyester reinforcement is used to perform maximum tensile strenght in extreme mechanical conditions.
Maxima Series Membranes
BITULINE Maxima
The “Maxima” group contains elastomeric membranes modified with “Styrene Butadiene Styrene” (SBS). Having the highest possible flexibility even at lowest temperatures (minimum -20°C)and increased their tensile strenght with minimum of 180 gr/m² of polyester reinforcement, BITULINE Maxima MP series membranes are especially suitable for cold climates and are also ideal for “bundle” type foundation waterproofing against underground water subject to pressure as well as for roofs subject to high vibrations or dilatation. Minimum of 60 gr/m² of fiberlass reinforcement are used in “Maxima” MG series.
BITULINE Antiracine
The BITULINE Anti-root EP300 Anti-racine and EP400 Anti-racine membranes are used for intensive or extensive roof planting of gardens and are resistant to root perforation or penetration damages. The BITULINE Anti - racine membranes have been tested during two years by University of Applied Sciences Research "Institute of Horticulture" - Germany by FLL method and granted FLL root resistance Certificate.
The BITULINE Antiracine is used in System ONDUGREEN, the green roof system.
BITULINE Tropica
The "Tropica" series consist of plastomeric membranes modified with "Atactic Polypropylene" (APP). BITULINE Tropica membranes are in compliance with and warm weather conditions of mild climate zones (minimum 0°C) offering economic and reliable waterproofing systems with a wide spectrum for different types of buildings. Minimum 150gr/m² of polyester reinforcement are used in "Tropica" PP series and minimum of 50gr/m² of fiberlass reinforcement are used in "Tropica" PG series.
Colours
Prima-Extra-Maxima Series Granulated Membrane Colours
Gray |
Red |
Green |
Cafe Flame |
Terracotta |
Blue |
Two |
Two |
Two |
![]() Two Tones Black |
![]() Two Tones Green |
![]() Pastel Green |
![]() White |
Extra Series Aluminium Membrane Colours
Natural |
Gray |
Terracotta |
Bordeaux |
Pastel Green |
Cream |
Copper |
Marine Blue |
Green |
![]() |
BITULINE Primer High quality non - ionic bitumen emulsion produced in accordance with TS113. Packing: 17 kg Net metal tin. |
![]() |
Rainwater Hopper With Vertical Outlet Thermoplastic rubber Outside diameter: 92 mm (Fits to ø100 PVC pipe) Depth: 180 mm |
![]() |
Roof Skylight |
![]() |
Wall Base Rainwater Hopper Outlet dimension: ø100 Depth: 330 mm |
![]() |
Air Shaft Thermoplastic rubber Inside diameter: 75 mm Height: 270 mm |
![]() |
Round Leaf Trap For vertical and horizontal rainwater outlets |
![]() |
Aluminium Z-Profile (for finishing details) |






We recommend that you turn to a professional for the installation.
